Lift Equipments

TK Mak Sanat Industrial Group is a supplier of various repair jacks, including two-column jacks, scissors jacks, Jahar column jacks in models and brands, in Iran and abroad.

To get acquainted with the types of repair jacks, he defines and uses them below

Two-column jack :

This jack is the most widely used jack in repair shops, oil change car repair shops, tire shops, etc. The most important advantage of the two-column jack is its lower price compared to other jacks and the ease of installation, even in places where the basement is below. Also, if the buyer of the two-column jack intends to move his device in the following years, the jack can Move to a new location. The two-column jack is used in all mechanical and car repairs, gearbox repairs, four-wheeled upholstery and inspection, exhaust manufacturing, tire change and oil change, car wash and laundry applications, and complete under-car inspection due to its excellent traffic space.

Due to the fact that the service pit is obsolete, the car owner is not willing to go to the service pit to visit his car, so having a two-column jack, the car owner travels under his car and visits the condition of his car and facial repairs. This is an important advantage for the repairman to generate more revenue, because the car lift jack attracts customers to repair shops and oil change centers and hardware and mechanical and so on.

To install a two-column jack in the standard mode, a space with a width of 3.5 meters, a length of 5 meters and a height of 4 meters is required. However, in some cases with relatively few spaces, the two-column jack has been installed at the customer's request because the repairman Can adjust the car to the desired height to perform services. The safety of the two-column jack is very high due to the two-way safety locks and it locks on both sides at any height that is set.

Scissors Jack :

This jack is available in three different modes: built-in scissor jack, surface-mounted scissor jack, and steering wheel scissor jack. In the built-in scissor jack, the undercarriage plates and the car room are gone, and when the car is lifted, the four wheels are free.

Advantages :

An important advantage of the scissor jack is that it does not create an annoying space. After the repair operation is completed, the jack plates lie down and in the built-in models, it is completely level with the ground. Another advantage of the scissor jack is that it requires less space for installation. The plate of the scissors jack is about sixty centimeters and the space between the two plates is about eighty centimeters and the length of the plates is about one hundred and forty centimeters, which is also equipped with sliding plates to adjust the length. The scissor jack requires a space of about two meters to install, which is an important advantage.

Built-in scissor jack requires foundation for installation, but surface-mounted scissor jack does not need foundation.

In terms of repair standard, the built-in scissor jack is more suitable because the plates are completely level with the ground after finishing the work, but the surface of the scissors jack occupies a space about ten centimeters above the ground after finishing the work and sleeping the plates on the ground. And while the price of surface scissor jack is higher than built-in scissor jack.

The mechanism of operation of the built-in scissor jack and the surface-mounted scissor jack are similar, and this jack is used in mechanical applications and upholstery, and in repair shops, due to its proper use, in order to attract customers and perform car repairs and inspections. Scissors in both models are very high due to having two-way locks and the repairman can raise the car to the desired height.

Steering wheel scissors jack :

Scissor jack has a different amount of steering function than surface and built-in scissor jack. Car lifting operation In scissor jack, the amount of steering is done from under the car wheels so that the car goes on the lifting plates with the wheel and the length of the lifting plates is about five meters. It is equipped with train table plates for steering wheel as well as rear and front sliding plates as an option to check the condition of all four wheels. These sliding plates are used in technical inspection centers. Also, the scissor jack level of steering wheel in most models is equipped with internal jack. In order to raise the car and release the wheels for repairs. As a result, the steering jack is used in technical inspection centers and repair shops that perform steering operations other than the four-column jack. Scissor jack safety. The amount of steering is very high due to the two-way locks and can be installed as a built-in and surface.

Four-column jack :

This jack has four columns that need to be installed for a space with a width of about 3.5 meters and a length of about 5 meters, four columns are located at specified distances. This jack is equipped with two lifting plates that lift the car from below The wheels are done. In this way, the car goes on the plates with the wheels and the repairman raises the car to the desired height. The four-column jack is used for mechanical and repair work, upholstery and steering gear, which for the steering gear must be equipped with table plates, and also the internal jack to release the wheels in the four-pillar jack is optional and therefore Repairs and inspections are used for car wheels. Also, the four-column jack is equipped with sliding plates to check the performance of the car wheels. The safety of the four-column jack is very high due to the column lock, and this jack is used in large repair shops and dealerships. Car licenses have many uses.

Single Column Jack :

Single column jack is available in two models in the market:

Portable single column jack :

This jack has a lifting capacity of two and a half tons and is suitable due to the advanced mechanism in repair shops that do not want to drill to install the jack or move the jack in the repair shop.