Your car oil must be between 60 and 80 degrees Celsius.
Make sure all air outlet valves are closed.
Use the couplings to connect the air hose to the device - Using the couplings will speed up the connection and disconnect the air hose from the device - After connecting the air to the device, do not cut off the air until your degree is fixed (at least 400 times Must arrive)
Use the most suitable (reed or trap) to start work.
When using the device, make sure that the valves on the tank are closed.
After connecting the straw to the wet work and connecting the suction hose, open the valve on it to suck the oil.
After completing the oil suction, open the valve between the lantern and the tank to drain the oil into the tank. When draining the oil from the lantern to the tank, the device should not be in operation (suction).
Close the valve after draining.
Adjust the height of the funnel with the nut next to the metal tank.
To drain the oil inside the hopper, open the valve under the hopper.
First connect the straw to the hose, then open the valve.
Choose the most suitable straw (depending on the car)
Open the valve on the hose
After suction, close the valve and remove the straw.
4- Things to be careful about
Do not fill more than 8 liters of oil in a lantern.
Moving on uneven terrain causes the wheels to break.
Use the device only for oil suction. If you use the device for suction of gasoline and acidic substances, the device will be damaged and will not suck anymore.
Do not work on the welding machine.
Do not add an extra device to the device.
Check and clean the appliance every day. Do not use gasoline for cleaning.
When the air is on but the temperature does not rise, make sure the inlet valve is open.
When the air is connected but the air does not come out of the muffler (air outlet), the muffler has its seams taken, which must be opened, clean it and reconnect it.
If the above is not done, the company will not accept the failure of the device and is out of warranty.