Nitromac F30WP model rim straightener

F30WP rim smoothing machine manufactured by Nitromac Turkey is used to repair and restore all kinds of steel and aluminum rims in sizes from 10 to 30 inches. Also, this rim smoothing machine has a lathe for turning the edges of the rim. This Turkish Nitromac rim smoothing machine has The U-shaped chassis is on the top of the device, which gives the user a lot of space to repair the top part of the rims. Other features of this rim straightener model include having a heater to heat the rim, as well as the ability to adjust the rotation speed (with dimmer). Finally, it should be mentioned that only the F30WP rim polisher has a ring polishing device, which is installed on the lathe, and it has the ability to separate the polishing device when working with a lathe. TK Mak Industrial Group Sanat is the only official representative of Nitromac Turkey in Iran.

Device specifications:

- Has 1 strong pump in the device

- Italian lathe for grinding the edges of the rim with a rail work line that reduces the error in the work to zero

- Types and types of flakes and converters in different sizes

- It has a tailiver with multiple edges

- It has the ability to adjust the rotation speed of the machine shaft

- It has a strong body with compact sheets

-Equipped with steel shaft with high load bearing

- Work table on the device (fixed) and parts tray (variable)

-Electricity of a single-phase device with a switchboard

- Heater with constant degree for heating the rim with high safety

- With LED lights for a clear display of the rim when working

- It has an emergency switch for operator safety

- The key of the device is installed on both sides of the device

-Thick and strong chassis on which the rim shaft is mounted

Thick pump hoses that can be used under special conditions

- High speed and accuracy compared to mechanical samples

- Support for rim sizes from 10 to 30 inches

- The power of the hydraulic pump is 5 tons

-Hydraulic motor: 0.55 kW 900 rpm

-Mechanical engine: 0.55 kW 1400 rpm

- Smoother of aluminum and steel rims

- The weight of the machine is 480 kg and the dimensions are 800 x 1500 x 1600 mm

- It has a ring polishing machine, which is installed on the lathe, and the polish can be removed when working with the lathe.

- The ability to rotate and maneuver on the rim

- It has 1 separate chassis on top of the device to place the pump

- It has a powerful electric motor with low vibration and noise

- It has a U-shaped chassis on the top of the device, which gives the user a lot of space to repair the top of the rims

- It has a level that shows the user the possibility of seeing the minimum swing of the rim